Kramer-electronics SID-VGA Uživatelský manuál stáhnout pdf (Strana 1)

The Kramer SID-VGA UXGA Step-In Commander

Congratulations on purchasing your Kramer DigiTOOLS

SID-VGA UXGA Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer SID-VGA is a VGA (up to UXGA) and unbalanced stereo audio remote

control panel that is used to remotely take control of a compatible switcher, for example,

the VP-81SID.

Figure 1 and Table 1 define the SID-VGA UXGA Step-In Commander.

Figure 1: SID-VGA UXGA Step-In Commander Front and Rear Panel

Table 1: SID-VGA UXGA Step-In Commander Front and Rear Features

Feature

Function

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

UXGA INPUT 15-pin HD Connector

Connect to the VGA video source

STEP IN Button

Press to switch the input to this remote control commander. The

button lights when active

ON LED

Lights green when the unit receives power

LINE OUT Twisted Pair RJ-45

Connector

Connect to the TP input of a compatible switcher (for example,

the VP-81SID) using CAT 6 or higher specification cable

Remote Switch Terminal Block

Connections

Connect to the remote step-in switch

12V DC Power Connector

Connect to the power adapter

Remote LED Terminal Block

Connections

Connect to the remote LED (observe correct polarity as shown

in the graphic)

Figure 2 illustrates how to connect the SID-VGA to a source and switcher.

Figure 2: SID-VGA Wiring Connections

To connect the SID-VGA as illustrated in Figure 2:

1. Connect the VGA video source (for example, a computer graphics source) to the

VGA connector on the front panel of the SID-VGA.

2. Connect the unbalanced stereo audio source (for example, a computer graphics

source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the

SID-VGA.

3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the

SID-VGA to one of the inputs on the rear panel of the VP-81SID (up to 50m

away).

4. Optional—Connect the terminal block on the rear of the SID-VGA to the remote

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the SID-VGA

and to the mains electricity.

1 2

Shrnutí obsahu

Strany 1

The Kramer SID-VGA UXGA Step-In Commander Congratulations on purchasing your Kramer DigiTOOLS® SID-VGA UXGA Step-In Commander which is ideal for boa

Strany 2 - Installation Instructions

Performing a Phase Calibration In the event that there is noise visible on the picture, you should perform a phase calibration. To perform a phase ca

Komentáře k této Příručce

Žádné komentáře

Kramer-electronics SID-VGA Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro elektriku Kramer-electronics SID-VGA. Kramer Electronics SID-VGA User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Kramer-electronics SID-VGA Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro elektriku Kramer-electronics SID-VGA. Kramer Electronics SID-VGA User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro elektriku Kramer-electronics SID-VGA