Kramer-electronics VP-747 Uživatelský manuál stáhnout pdf (Strana 17)

12 VP-747 - Connecting the VP-747

5 Connecting the VP-747

Always switch off the power to each device before connecting it to your

VP-747. After connecting your VP-747, connect its power and then

switch on the power to each device.

The VP-747 is a universal presentation matrix switcher/scaler that lets you choose

what sources to connect to the inputs. For example, you can connect just five

sources: an RGBHV source, two DVI/HDMI sources, an HDTV source and an

RGBS source (as the example in

Figure 3 shows).

To connect the VP-747 as illustrated in the example in Figure 3, do the following:

1. Connect the following video sources:

 An HDMI source to the INPUT DVI/HDMI 1 connector

 An HDMI source to the INPUT DVI/HDMI 2 connector

 An HDTV satellite receiver source to the R/PR, G/Y/CV, and B/PB/C

BNC INPUT 6 connectors (PR/Y/PB)

 An RGBHV computer graphics source to the R/PR, G/Y/CV, B/PB/C,

HS/CS and V BNC INPUT 8 connectors (R, G, B, H, V)

2. Connect the PROGRAM OUT:

 DVI/HDMI connector to the plasma display

 VGA 15-pin HD connector to the analog display

 R/PR, G/Y, B/PB, (PR, Y, PB) BNC OUTPUT connectors to the YUV

acceptor, for example, a projector (PR,Y, PB)

3. Connect the PREVIEW OUT R/PR, G/Y, B/PB, HS and VS BNC OUTPUT

connectors to the display (R, G, B, H, V)

4. Connect the power cord.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 64 65

Žádné komentáře

Kramer-electronics VP-747 Uživatelský manuál Strana 17