Kramer-electronics VP-790 Uživatelský manuál stáhnout pdf (Strana 19)

VP-790 - Configuring the VP-790 via the OSD MENU Screens

Setting

Function

Component Sync

Select the component sync: 3 Wire, 4 Wire, Auto

3 Wire: The sync signal is stripped from the green or Y channel (typical

for YUV)

4 Wire: The sync signal is derived from a separate sync line (typical for

RGB)

Auto: Automatically detects a sync signal

The Auto setting will automatically detect a sync signal and set-up the

VP-790 accordingly

SDI to HDMI Audio

Map

Select the channels through which the SDI audio signal will be routed to

the HDMI output: Stereo ch(1,2), Stereo ch(3,4), Stereo ch(5,6), Stereo

ch(7,8) or multichannel

The SDI audio input is routed to the HDMI and 3G-SDI output

connectors by default. Two consecutive SDI audio channels can be

output on the HDMI/3GSDI output interface. The group can be chosen.

Or all eight SDI audio channels can be transmitted.

SDI Audio Routing

Select HDMI & SDI or S/PDIF

H-Position

Set the horizontal position according to the input resolution

For UXGA and component video inputs

V-Position

Set the vertical position according to the input resolution

Frequency

Adjust the frequency

For UXGA inputs

Phase

Adjust the phase: 0 to 31

Auto image

Assesses the image and improves the quality accordingly, by

automatically adjusting the phase, frequency and position

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 46 47

Žádné komentáře

Kramer-electronics VP-790 Uživatelský manuál Strana 19