Kramer Electronics Typewriter SV-552 Uživatelský manuál stáhnout pdf (Strana 31)

Defining and Connecting the Wall Plates

2. On the rear of the SV-302, connect the RJ-45 CAT 5 connector to either

input VIDEO 1 or VIDEO 2 input on the SV-552.

7.3.3 Connecting the SV-306 Wall Plate to the SV-552 (Optional)

In addition, using BC-DGKat524 or BC-DGKat-623 cable as shown

Figure 9, you can connect the:

• SV-306 which accepts an HDMI source and connects to the HDMI

input on the rear of the SV-552. The input signals are converted via an

RJ-45 CAT 5 connector at the rear, and transmitted to the SV-552. The

SV-306 also has an IR out 3.5mm mini connector (connection to the

SV-552 is similar to the SV-302)

• SV-307 which accepts a DVI component video source on three RCA

connectors, as well as a digital audio (S/PDIF) input on an RCA

connector, and connects to the HDMI input on the rear of the SV-552.

The input signals are converted via an RJ-45 CAT 5 connector at the

rear and transmitted to the SV-552.

Figure 9: Connecting the SV-306/307 to the SV-552

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 44 45

Žádné komentáře

Kramer Electronics Typewriter SV-552 Uživatelský manuál Strana 31