Kramer-electronics PL-18 Uživatelský manuál stáhnout pdf (Strana 13)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Protocol 3000 Syntax

8.5 Machine Information Commands

Command Syntax Response

Execute firmware upgrade* UPGRADE UPGRADE OK

Firmware usually uploads to a device via a command like LDFW. The device may need to be reset to complete

the process.

Reset to factory default

configuration

FACTORY

FACTORY RESULT

8.6 Reset Command

Command Syntax Response

Reset device RESET RESET OK

9 Protocol 3000 Syntax

Protocol 3000 is used to control the PL-18 via the RS-232/2 connection

using an RC-type controller or a PC, touch screen, other serial controller.

9.1 RS-232/2 Settings

Port RS-232/2

Baud Rate: 115,200

Data Bits: 8

Stop Bits: 1

Parity: None

Command Format: ASCII

9.2 Host Message Format

Start Address (optional) Body Delimiter

Destination_id@

Message

9.2.1 Simple Command

Command string with only one command without addressing:

Start Body Delimiter

Command SP Parameter_1,Parameter_2,… CR

9.2.2 Command String

Formal syntax with commands concatenation and addressing:

Start Address Body Delimiter

Destination_id@

Command_1 Parameter1_1,Parameter1_2,…|

Command_2 Parameter2_1,Parameter2_2,…|

Command_3 Parameter3_1,Parameter3_2,…|…

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Žádné komentáře

Kramer-electronics PL-18 Uživatelský manuál Strana 13