Kramer-electronics PL-8 Uživatelský manuál Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 23
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol
16
Note:
* Command required Admin login.
* New ID will done only after device resetting
* Connecting 2 devices with same ID over one KNET network could cause unexpected behavior.
7.3 Protocol 3000 Syntax
Protocol 3000 is used to control the PL-8 via an RS-232 connection using a
PC, touch screen, other serial controller or RC type controller.
7.3.1 Host Message Format
Start Address (optional) Body Delimiter
#
Destination_id@
Message
CR
7.3.1.1 Simple Command
Command string with only one command without addressing:
Start Body Delimiter
#
Command SP Parameter_1,Parameter_2,… CR
7.3.1.2 Command String
Formal syntax with commands concatenation and addressing:
Start Address Body Delimiter
#
Destination_id@
Command_1 Parameter1_1,Parameter1_2,…|
Command_2 Parameter2_1,Parameter2_2,…|
Command_3 Parameter3_1,Parameter3_2,…|…
CR
7.3.1.3 Device Message Format
Start Address (optional) Body delimiter
~
Sender_id@
Message
CR LF
7.3.1.4 Device Long Response
Echoing command:
Start Address (optional) Body Delimiter
~
Sender_id@
Command SP [Param1 ,Param2 …] result CR LF
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
SP = Space (ASCII 32 = 0x20)
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23

Komentáře k této Příručce

Žádné komentáře